PCIM - Hall 6 stand 140
05-07 June, 2018 : PCIM Europe (Power Conversion and Intelligent Motion) is the international leading exhibition for Power Electronics, Renewable Energy and Energy Management.
Exxelia booth : Hall 6 stand 140
05-07 June, 2018
Messe Nuremberg, Germany
INNOVATIVE LOW PASS FILTERS
Low-pass filter solutions are mainly used for EMI suppression in electronics systems. Exxelia Technologies (ex-Eurofarad), part of Exxelia Group, has developed several ranges of miniature filters with different low-pass configuration (C, L, Pi, T, 2xPi, 2xL and 2xT) mainly intended to protect electronic equipment from interferences. Exxelia Technologies produces sophisticated filters assembling Exxelia Group’s manufactured ceramic capacitors (X7R/ NPO) with ferrite inductors or winding cores in a shielding case. This solution’s main benefits are performance, reliability and optimal traceability. Considering a filter in a shielding case implies a good metallic package to insure high shielding performances with attenuation up to 10 GHz. Among options, Exxelia offers glass sealing, steel or kovar package using tin, silver or gold plating treatments to withstand any thermally or mechanically challenged applicaiton. Exxelia offers innovative EMI suppression filter solutions providing great shielding performance including the FC030 feedthrough mounted on shielding enclosure and FCM030 series designed to prevent EMI on printed circuit board. FC030 series is feedthrough filter allowing to prevent not only EMI conduction but also EMI radiation on power supply or data signals designs up to 200V. FC030 insertion loss can be 20dB at 1MHz to reach 70dB up to 10 GHz. FC030 series is extremely performant on low frequencies applications. On the other hand, FC030 can offer very low capacitance values starting from 5pF allowing to protect high bandwidth data signals. Operating temperature from -55C° up to +175C°. FC030 series is ESA qualified. FCM030 features same design and performances’ as FC030 and is intended for surface mount devices. FCM030 is packaged in full metallic silver plated allowing optimal contact with ground plane that improves the interferences flow to the ground. The series particularly fit for amplifiers, radars, sensitive HMI, accurate measuring.
Innovative new products at Electronica - Booth# B5 312 -
Felsic HV, long lifetime and high voltage screw terminal The Felsic HV family of aluminum electrolytic screw terminal capacitors provides great performances in energy density and ultra-long lifetime. For example products can withstand 8 000 hours at 105°C under high values of current which makes them the perfect choice to overcome railway constraints. The family also has one of the lowest ESR for aluminum capacitors, less than 10m0hms in most cases. Products are available for voltages from 160 to 450 Vdc, and offer capacitance values from 1500μF up to 47 000μF. Thus the family is a good compromise between reliability and compacity, with for example 47 000μF @ 160V in a 90x200mm volume. Cost-effective common-mode chokes qualified for aerospace Designed and qualified for aerospace, the TCM series is available in a through-hole package for horizontal and vertical mounting. TCM common-mode chokes are offered with inductances from 0.7 to 47mH under rated currents from 0.3A to 4A, and thoroughly tested by a dielectric withstanding strength at 1500VAC. Their excellent thermal properties allow the TCMs to operate without a hitch from -55°C up to +125°C, which, combined to the high mechanical resistance of the chosen materials (all meeting to UL94 V0 rating) make those products the perfect fit for aviation, defense and transportation industries. Ceramic capacitors based on the new C48X dielectric New range of high voltage ceramic capacitors based on brand new dielectric material C48X, combining most advantages of NPO and X7R dielectrics. Compared to X7R material, C48X dielectric allows to get the same capacitance values under working voltage with the unrivaled advantage of a very low dissipation factor (less than 5.10-4). Besides, it can also withstand very high dV/dt, up to 10kV/μs, which makes it the solution of choice for pulse and fast charge/discharge applications or firing units. Thus capacitors with C48X dielectric appear to be ideally suited for power applications where heat dissipation may be detrimental to performances and reliability. Ultra low ESR, high RF power and high self-resonant frequency The new NHB series is a complete range of MLCC based on NPO dielectric material providing a very high Self Resonant Frequency and limiting the parasite Parallel Resonant Frequencies. The series is available in 1111 size with capacitance ranging from 0.3pF to 100pF. NHB series offers excellent performance for RF power applications at high temperature up to 175°C and at 500 VDC. The lowest ESR is obtained by combining highly conductive metal electrodes and proprietary of new NPO low loss rugged dielectrics. NHB series particularly fits for high power and high frequency applications such as: cellular base station equipment, broadband wireless service, point to point / multipoint radios and broadcasting equipment.