Introduction of DSCC 93026 qualified Wet Tantalum Capacitors
Exxelia has received the qualification by the Defense Supply Center Columbus (DSCC) as an approved provider of WT84 wet tantalum capacitors under the drawing DSCC 93026.
Exxelia’s range of wet tantalum capacitors WT84 is now fully qualified to DSCC 93026 drawing for voltages from 25V up to 125V. Available in all case sizes (T1, T2, T3, T4) the family is housed in a hermetically sealed tantalum case and is designed to withstand the most stringent environmental constraints. Thanks to the continuous improvements conducted in the manufacturing processes combined with the high purity tantalum powder used by Exxelia, DSCC 93026 provides the highest capacitance per unit volume. In addition, compared to conventional wet tantalum capacitors, DSCC 93026 features much lower ESR and higher ripple current.
DSCC 93026 is qualified for capacitance values range from 10µF up to 1800µF at voltages from 25V up to 125V, and with operating temperatures of -55°C to 125°C. The series is ideal for use in high-reliability defense, avionics, radars and power supply applications requiring high capacitance or high energy storage.
DSCC 93026 is available now for order.
Exxelia MIL Wet Tantalum Capacitors M39006/22 now qualified to Level P
Exxelia MIL Wet Tantalum Capacitors M39006/22 now qualified to Level P June 24th, 2019 – Paris, France – Exxelia, a French leading global designer and manufacturer of high-rel passive components and sub-systems dedicated to harsh environments, has received the P-Level qualification approval for its Wet Tantalum Capacitors MIL-PRF-39006/22. Exxelia’s MIL 39006/22 equivalent to CLR79 series is now approved to P-level reliability (0,1% / 1,000 h) for voltage ranges from 6V to 125V with a capacitance value ranging from 1,7µF to 1200µF. Available in T1, T2, T3 and T4 case sizes, these products are housed in a hermetically sealed Tantalum case operating from -55°C to +125°C and are designed to withstand the most stringent environmental constraints. FEATURES: Qualified for voltages up to 125V Provides from 1200µF at 6V to 56µF at 125V Highest Energy Density Unlimited shelf life Available with H vibration and shocks Manufactured in France MIL 39006/22 Level P are now available for order with a 14 weeks lead-time.
QPL CERTIFICATION for PM907S & PM948S SERIES OF FILM CAPACITORS
Series PM907S and PM948S of Film capacitors obtained the QPL certification from the European Space Components Coordination (ESCC). According to the ESCC Detail Specification No. 3006/025 and 3006/026 QPL certified products ensure superior performances, quality and reliability intended for use by the European Space Agency (ESA) and in Space in general. PM907S and PM948S are full series of Polyester Film Capacitors. PM907S products are suitable for voltages from 50V up to 1250V and offer capacitance values from 82nF up to 180μF. PM948S can be used with a voltages from 50V up to 630V with capacitance values from 22nF up to 47μF. Both series can support extreme conditions with temperatures from -55°C to +125°C, and offer high energy density, low ESR & ESL and high RMS current. Products are typically being used in SMPS (Switch Mode Power Suppliers) and BUS filtering. These two certified series complete the list of Exxelia Group’s QPL certified film capacitors, that now includes: – PM90S – PM907S – PM96S (T) – PM94S – PM948S – MKT5 – KM111S – KM94S