Fork me on GitHub

Exxelia at EMV

Exxelia is pleased to exhibit at EMV 2019 in Stuttgart, Germany from March 19 to 21 inHall C2 Booth# 113, Exxelia will be introducing a new filter design conception.


Showcased at Exxelia’s booth #113 in Hall C2, will be Asymmetric filter solutions, the most optimized design in the market.
Smaller, lighter and consequently easier to install, Exxelia is the only manufacturer to solve HEMP requirements with Asymmetric filter designs, hence addressing the security challenges of tomorrow.

Exxelia pushes the limits of design with the new BDP series allowing a 50% space saving in your installation while keeping high technical specifications (insertion loss of 80dB, 1250A, 300kHz to 18GHz) and complying with the MIL STD 188 125 1&2 test requirements.

Asymmetric designs allow to combine safety and miniaturization while still handling HEMP and TEMPEST requirements. Three important benefits stand out from this conception, starting with a lower heat dissipation: as no magnetic field is generated, inductors suffer no heat dissipation. Secondly, the leakage is significantly lower thanks to a low value capacitance. Finally by using only one common inductor, these designs definitely save space.

Dr. Guillaume Aubard, Exxelia Filters’ Business Development Manager will be speaking at EMV Forum Hall C2-319 on March 20th from 3:40pm to 4pm about the Asymmetric filter solutions for HEMP and TEMPEST following by a Q&A.

Publié le 06 Mar 2019 par Rebecca Charles

Fusion d'Exxelia Microspire et Exxelia N'Ergy

Exxelia Magnetics regroupe toutes les activités de conception, fabrication et industrialisation de composants magnétiques bobinés, du groupe en France : transformateurs et inductances, électroaimants, rotors et stators. Cette fusion vise à améliorer les services réalisés auprès des clients et autres collaborateurs mais également à simplifier les démarches administratives et commerciales. L’organisation actuelle des entreprises, les sites et leurs fonctions allouées restent inchangés. Exxelia Microspire conçoit, industrialise et fabrique depuis plus de 35 ans des composants bobinés : transformateurs et inductances, électroaimants, rotors et stators. Exxelia Microspire dispose de plusieurs sites de fabrication dont notamment des sites à faibles coûts de production nouvellement installés, permettant de proposer des solutions compétitives. Le savoir-faire d’Exxelia Microspire inclut les technologies standards de bobinage linéaire (formats RM, ETD, EP, EFD, ER, EQ..) et toroïdal. Pour les marchés à environnements sévères (chocs, vibration, hautes températures, …). Exxelia Microspire dispose de technologies spécifiques et innovantes telles que les technologies SESI, TT et CCM. La qualification de ses technologies, la définition des règles de conception associées et son organisation industrielle lui permettent de proposer à ses clients des solutions optimales. Exxelia N’Ergy est spécialisée dans la conception, la fabrication de composants électromagnétiques passifs spécifiques, en petite et moyenne série. Exxelia N’Ergy propose : l’étude et la conception de composants électromagnétiques spécifiques avec conducteurs cuivre ou aluminium destinés aux domaines de la conversion d’énergie de produits embarqués, la fabrication de bobinages linéaires ou toriques en petite et moyenne série en fourniture complète ou partielle, le surmoulage de composants électromagnétiques ou de cartes (potting), le contrôle électrique 50 ou 400 Hz.

Exxelia à Space Tech Expo

ESA QPL Film Capacitors PM907S and PM948S are full series of Polyester Film Capacitors. PM907S products are suitable for voltages from 50V up to 1250V and offer capacitance values from 82nF up to 180μF. PM948S can be used from 50V up to 630V with capacitance values from 22nF up to 47μF. Both series can support extreme conditions with temperatures from -55°C to +125°C, and offer high energy density, low ESR & ESL and high RMS current. Film capacitor Series PM907S and PM948S are ESA QPL certified according to the ESCC Detail Specification No. 3006/025 and 3006/026   Smallest ESA QPL Ceramic Capacitor of the Market Exxelia ranges of low voltage MLCC for surface mounting, CEC19 and CNC19, have achieved the ESA Qualified Part List status under the criteria of the European Space Component Coordination’s (ESCC) 3009/042 and 3009/043 respectively. The  0402 size QPL-qualified parts are available from 10V to 25V, enabling substantial miniaturization and cost-saving. They are available either in the very stable NPO dielectric (type 1) or the high capacitance X7R (type 2). CEC and CNC series combine high capacitance values with high thermal and voltage stability. Versions with polymer terminations are also QPL-certified.   Miniature EMI filters for space application Exxelia’s gold-plated glass-sealed EMI filters SFC030 is the solution of choice to protect several embedded power supplies and data lines.  These small and reliable filters are available up to 5A @ 200V and 22nF.  Available in a Kovar package, the better alternative to steel for enhanced temperature cycling resistance, all Exxelia’s EMI filters for space are ESA qualified according to ESCC 3008. Thanks to this extensive experience in stringent ESA testing, Exxelia is able to adapt the tests of any filter according to any need (example: SMD 20A chip, 0pF capacitor value for an arrays of filters).

En poursuivant votre navigation sur ce site, vous acceptez l’utilisation de cookies pour réaliser des statistiques de visites.